Cast Fascia Bracket - Plain

Printer Friendly Version

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted. We recommend spacing our fascia brackets every 32" on center. Fascia brackets can be mounted the fascia board with 3 - 1½" stainless steel hex head screws. Click for the selection of Accessories

6" angled view 6" side view

The gutter nests inside the fascia bracket and can be secured down in the following ways: Screw Installation A black oxide stainless steel machine screw is placed through the front of the fascia bracket and gutter, then anchored on the inside with a flanged nut. Tab Installation A tab is secured to the fascia bracket with a black oxide stainless steel screw and t-nut. The tab is folded over the gutter to secure in place. For an angled fascia application we offer 15, 25, 35 and 45 degree wedges to be used with our fascia brackets. In a situation where a fascia installation is not applicable a fascia bracket with a roof bar can be used.