Stamped Fascia Bracket

Printer Friendly Version

We recommend spacing our fascia brackets every 32" on center. Our stamped fascia bracket requires the fascia board to be at least 4½" in height.

The gutter is secured by folding the back tab down and the front tab over the lip of the gutter. Stamped fascia brackets are installed on a fascia board using 3 - #10 1½" hex head stainless steel screws. Available in copper, chromated aluminum, colored aluminum, and galvalume.

Stamped fascia brackets are not as strong as our cast fascia brackets. If you are in an area that has heavy snow fall, we recommend cast fascia brackets for strength.

		Stamped bracket with wedge



STAMPED COPPER

Item#	Description	Price (each)

STMT5C	5" x .050 copper	$7.50
STM6C	6" x .050 copper	$8.75
STM8C	8" x .050 copper	$10.95



STAMPED CHROMATED ALUMINUM

STMT5A	5" x .060 chromated aluminum - ready for paint	$3.80
STM6A	6" x .060 chromated aluminum - ready for paint	$4.25
STM8A	8" x .063 chromated aluminum - ready for paint	$6.95



5" STAMPED .032 colored aluminum (to match gutter) BRACKET CONSISTS OF TWO PIECES. DO NOT SEPARATE DURING INSTALLATION

STMT5LGW	5" - low gloss white	$3.50
STMT5HGW	5" - high gloss white	$3.50
STMT5RB	5" - royal brown	$3.50
STMT5ALM	5" - almond	$3.50
STMT5WKR	5" - wicker	$3.50
STMT5CL	5" - clay	$3.50
STMT5PG	5" - pearl gray	$3.50
STMT5LB	5" - light bronze	$3.50
STMT5DB	5" - dark bronze	$3.50
STMT5GG	5" - grecian green	$3.50
STMT5MB	5" - musket brown	$3.50
STMT5BLK	5" - black	$3.50
STMT5CT	5" - coppertone	$3.50

6" STAMPED .032 colored aluminum (to match gutter) BRACKET CONSISTS OF TWO PIECES. DO NOT SEPARATE DURING INSTALLATION

STM6LGW	6" - low gloss white	$3.95
STM6HGW	6" - high gloss white	$3.95
STM6RB	6" - royal brown	$3.95
STM6ALM	6" - almond	$3.95
STM6WKR	6" - wicker	$3.95
STM6CL	6" - clay	$3.95
STM6PG	6" - pearl gray	$3.95
STM6LB	6" - light bronze	$3.95
STM6DB	6" - dark bronze	$3.95
STM6GG	6" - grecian green	$3.95
STM6MB	6" - musket brown	$3.95
STM6BLK	6" - black	$3.95
STM6CT	6" - coppertone	$3.95



STAMPED GALVALUME - (26 gauge) BRACKET CONSISTS OF TWO PIECES. DO NOT SEPARATE DURING INSTALLATION

STMT5GAL	5" - galvalume	$3.50
STM6GAL	6" - galvalume	$3.95



Wedges for 5" & 6" Stamped Fascia Brackets



Stamped Bracket with Wedge

Wedges are available in six sizes - 7.5, 15, 22.5, 30, 37.5 and 45 degree solid brass or chromated aluminum (ready for paint). The appropriate length screws will be shipped with order. Note: It may be beneficial to use an additional screw, to tighten the wedge against the board, when installing on an uneven fascia. The screw placement will be on the underside of wedge marked by an indentation.

Front view of wedge	15 degree	22.5 degree
30 degree	37.5 degree	45 degree

5" & 6" STAMPED WEDGES

Item#	Description	Price

WSB7.5	7.5° brass (photo not shown)	$5.40
WSB15	15° brass	$5.90
WSB22.5	22.5° brass	$6.40
WSB30	30° brass	$6.90
WSB37.5	37.5° brass	$7.40
WSB45	45° brass	$7.90

WSA7.5	7.5° aluminum (photo not shown)	$2.90
WSA15	15° aluminum	$3.00
WSA22.5	22.5° aluminum	$3.10
WSA30	30° aluminum	$3.30
WSA37.5	37.5° aluminum	$3.40
WSA45	45° aluminum	$3.50