Fascia Bracket - 8" Bar Bracket

Our eight inch Bar Bracket is available in copper and chromated aluminum. Chromating is an industrial primer for aluminum and needs to be painted. We recommend spacing our fascia brackets every 32" on center. The bracket can be mounted to either the fascia board or rafter tails. In areas with no snow or ice, the back of the bracket can be bent, in a vice, to the desired angle of the fascia or rafter tail. The fascia bracket is installed with 3 - 1½" hex head screws. The gutter nests inside the bracket and is anchored by folding down both tabs. The Bar Bracket requires the fascia board to be a minimum of 3½" in height.